Soft stepping is the process where club shafts are made slightly more flexible. For example, if you had a stiff flex, after soft stepping the club it would become closer to a regular shaft and easier to hit if a player had issues with it being too stiff.
Similarly, what does soft stepping iron shafts do? Soft stepping is the term used to indicate changing flex of a taper tip shaft by adjusting the stiffness of a set of irons by putting the lower numbered iron shaft throughout the set. For example, the 8 iron shaft is put in the 9 iron, the 7 iron shaft in the 8 iron and so on through the set.
Also, how much difference does soft stepping make? Soft-stepping twice would be cutting the shaft as a 3-iron or two clubs more and would decrease the stiffness by a half flex. If you soft step once for one club, you will do so on all the irons and wedges to have a uniform progression of flex throughout the set. The downside to soft stepping is two-fold.
Subsequently, what is hard and soft stepping shafts?
In regards to, what is soft tipping a golf shaft? A tip soft shaft is one that is designed to be more flexible in the tip portion of the shaft which we define as the last 16” to 21” of the shaft. Likewise there can be any number of variations in how stiff the tip section of a shaft is designed.Higher Ball Flight When you soft step a set of irons, you are putting the golf shaft of a nine iron into the pitching wedge. This helps to make the club a bit longer, and it has a softer feel overall. In turn, golfers are able to get a higher ball flight and more performance from their golf clubs.
Should I Soft Step A golf shaft?
Soft stepping would enable the flex of the club shafts to be softer and more flexible. If you soft step a stiff flex shaft it would feel between a regular and stiff flex.
Does hard stepping lower ball flight?
Hard stepping a set of irons The effect on each club would be that each clubs shaft would be a little bit stiffer than they originally were and produce a slightly lower ball flight. Remember, when you hard step, the club lengths will decrease.
Should I hard step my irons?
“The main reason for soft or hard stepping is to change the feel of the shaft for golfers who really want their shafts to feel just right. The second reason is to try to change the launch angle and trajectory of the shot or to reduce or increase spin. A ½ inch can exhibit the beginning of a ‘feel’ difference.
What are stepped shafts?
STEPPED SHAFT. Refers to tubular steel shafts which taper in a series of steps rather than one continuous narrowing. The stepped shaft was introduced by the True-Temper Division of The American Fork and Hoe Company which initially manufactured shafts with a smooth taper from butt to tip.
What is wedge stepping?
Soft stepping is simply installing a lower numbered shaft than the shaft designated for a specific iron. For your C-Taper Lite shaft putting an 8 iron shaft in your 9 iron or pitching wedge would be soft stepping 1 X i.e. on time.
How do you stiffen a golf shaft?
What is iron stepping?
Stepping shafts is a method of reshafting that focuses on a flex between the specific designations, say, between a regular and a stiff flex. “Hard stepping” would make a shaft stiffer, “soft stepping,” more flexible. … A 6 iron shaft installed in a 5 iron head would be hard stepped, made stiffer by a 1/3.
What shaft does Bubba Watson use?
Bubba Watson put on his usual power display at the Farmers Insurance Open, averaging 316.6 yards per drive using his 7.5-degree Ping G15 driver. What most people don’t know, however, is that Watson uses one of the shortest driver shafts on the PGA Tour, a 44.5-inch Grafalloy BiMatrx prototype.
What driver shaft is most used on tour?
Fujikura driver shafts are the most used by the top 100 PGA Tour players with 28 players using them including Justin Thomas, Jordan Speith, Dustin Johnson, Rory McIlroy, Scottie Scheffler and Louis Oosthuizen. The Ventus Blue 6X and Ventus Black 6X shafts are the most popular individual driver shafts.
What is soft regular shaft?
PING recommends its “soft regular” shaft flex for players who swing their drivers at 90 mph or less. PING manufactures a variety of clubs with soft regular shafts, including drivers, hybrids, irons and wedges.
How much should I tip my driver shaft?
The average tip on drivers is about an inch, although some players go to greater lengths. Back when Tiger Woods was using a 42.5-inch True Temper X-100 steel shaft in his driver, all of the extra length (more than three inches) was cut off the tip to achieve the proper flex.
How do you hard step a wedge?
Are all steel shafts stiff?
The higher the speed, the stiffer the shaft. Steel shafts, which are heavier than graphite, are stiff and less forgiving than graphite. According to Golf.com, graphite shafts are lighter and can help increase swing speed.
Are Apollo golf shafts any good?
All of these shafts perform great and are at a price everyone can afford. But let’s not forget about some of the other shafts in the Apollo line. Some of which have been fan favorites for many, many years.
Why do shafts have steps?
So with steps, you’re going to be able to get more feel with that load and release.” As far as how the steps are added to the shaft, it’s done through a machining process called “swaging,” whereby the diameter of the steel is altered slightly in an efficient manner with minimal material waste.
